contestada

Hello, this is a 2 part question for my beginning assembly class. Thank you in advance for your help

Boolean Calculator (1)

Create a program that functions as a simple boolean calculator for 32-bit integers. It should display a menu that asks the user to make a selection from the following list:

1. x AND y

2. x OR y

3. NOT x

4. x XOR y

5. Exit Program

When the user makes a choice, call a procedure that displays the name of the operation about to be performed.

Boolean Calculator (2)

Continue the solution program from the preceeding exercise by implementing the following procedures:

- AND_op: Prompt the user for two hexadecimal integers. AND them together and display the result in hexadecimal.

-OR_op: Prompt the user for two hexadecimal integers. OR them together and display the result in hexadecimal.

- NOT_op: Prompt the user for two hexadecimal integers. NOT the integer and display the result in hexadecimal.

- XOR_op: Prompt the user for two hexadecimal integers. Exclusive-OR them together and display the result in hexadecimal.

The following is what our professor has given us help with:

Include Irvine32.inc

.data
msgMenu "---- Boolean Calculator ------------", 0dh, 0ah
BYTE 0dh, 0ah
BYTE "1. x AND y" , 0dh, 0ah
BYTE "2. x OR y" , 0dh, 0ah
BYTE "3. NOT x" , 0dh, 0ah
BYTE "4. x XOR y" , 0dh, 0ah
BYTE "5. Exit program" , 0dh, 0ah, 0dh, 0ah
BYTE "Enter integer>" , 0

msgAND BYTE "Boolean AND", 0
msgOR BYTE "Boolean OR", 0
msgNOT BYTE "Boolean NOT", 0
msgXOR BYTE "Boolean XOR", 0

msgOperand1 BYTE "Input the first 32--bit hexadecimal operand: ", 0
msgOperand2 BYTE "Input the second 32--bit hexadecimal operand: ", 0
msgResult BYTE "The 32-bit hexadecimal result is: ", 0

Respuesta :

Answer:

Complete code is given below:

Explanation:

INCLUDE Irvine32.inc

.data

msgMenu BYTE "---- Boolean Calculator ----", 0dh,0ah

BYTE 0dh,0ah

BYTE "1. x AND y"     ,0dh,0ah

BYTE "2. x OR y"      ,0dh,0ah

BYTE "3. NOT x"       ,0dh,0ah

BYTE "4. x XOR y"     ,0dh,0ah

BYTE "5. Exit program",0

msgAND      BYTE "Boolean AND",0

msgOR       BYTE "Boolean OR",0

msgNOT      BYTE "Boolean NOT",0

msgXOR      BYTE "Boolean XOR",0

msgOperand1 BYTE "Input the first 32-bit hexadecimal operand: ",0

msgOperand2 BYTE "Input the second 32-bit hexadecimal operand: ",0

msgResult   BYTE "The 32-bit hexadecimal result is:            ",0

caseTable   BYTE '1'     # lookup value

DWORD _AND_op        # address of the procedure

EntrySize = ($ - caseTable )

   BYTE '2'

   DWORD _OR_op

   BYTE '3'

   DWORD _NOT_op

   BYTE '4'

   DWORD _XOR_op

   BYTE '5'

   DWORD _ExitProgram

NumberOfEntries=($ - caseTable)/EntrySize

.code

main08stub PROC

   call Clrscr

Menu:

   mov edx, OFFSET msgMenu # menu choices

   call WriteString

   call Crlf

L1: call ReadChar

   cmp al, '5' # is selection valid (1-5)?

   ja L1   # if above 5, go back

   cmp al, '1'

   jb L1   # if below 1, go back

   call Crlf

   call **BLANK**

   jc quit # if CF = 1 exit

   call Crlf

   jmp Menu    # display menu again

quit: exit

main08stub ENDP

#----------------------------------------

**BLANK** PROC

#

# It selects a procedure from the case table

# Receives: AL = number of procedure

# Returns: nothing

#-----------------------------------

   ret

**BLANK** ENDP

#------------------------------------------------

_AND_op PROC

#

# Performs a boolean AND operation

# Receives: Nothing

# Returns: Nothing

#------------------------------------------------

   ret

_AND_op ENDP

#------------------------------------------------

_OR_op PROC

#

# Performs a boolean OR operation

# Receives: Nothing

# Returns: Nothing

#------------------------------------------------

   ret

_OR_op ENDP

#------------------------------------------------

_NOT_op PROC

#

# Performs a boolean NOT operation.

# Receives: Nothing

# Returns: Nothing

#------------------------------------------------

   ret

_NOT_op ENDP

#------------------------------------------------

_XOR_op PROC

#

#

# Performs an Exclusive-OR operation

# Receives: Nothing

# Returns: Nothing

#------------------------------------------------

   ret

_XOR_op ENDP

#------------------------------------------------

_ExitProgram PROC

#

# Receives: Nothing

# Returns: Sets CF = 1 to signal end of program

#------------------------------------------------

   ret

_ExitProgram ENDP

END main08stub