Respuesta :
The question is incomplete it should be:
Wind turbines designed for offshore installations are much larger than ones designed for use on land. One company makes a turbine for use on land with blades 39 m long that spin at 17 rpm , and a turbine for use offshore with blades that are twice as long.
The answer is to obtain the same tip speed, the RPM would need to be reduced to 1/2, or 8.5 RPM.
Wind turbines designed for offshore installations are much larger than ones designed for use on land. One company makes a turbine for use on land with blades 39 m long that spin at 17 rpm , and a turbine for use offshore with blades that are twice as long.
The answer is to obtain the same tip speed, the RPM would need to be reduced to 1/2, or 8.5 RPM.
Answer:
9 rpm
Explanation:
The question is incomplete. The following is missing:
Wind turbines designed for offshore installations are much larger than ones designed for use on land. One company makes a turbine for use on land with blades 38m long that spin at 18 rpm , and a turbine for use offshore with blades that are twice as long.
The speed at the tip is to be the same means that both turbines have the same tangential speed (τ):
τ = ω*r
where ω refers to angular speed (here it will be used directly in rpm), and r refers to radius of circular path, then:
ω1*r1 = ω2*r2
Replacing with r2 = r1*2
ω1*r1 = ω2*r1*2
ω1/2 = ω2
ω2 = 18/2 = 9 rpm
